Introduction
Eliflon C40-M00 fluoroelastomer is a medium viscosity copolymer of hexafluoropropene and vinylidene fluoride particularly suitable for injection moulding of sealing devices that must meet the most critical conditions of usage. The polymer is also appropriate for compression molding and extrusion applications. Due to narrow molecular weight distribution and a low long chain branching content Eliflon C40-M00 fluoroelastomer offers significant processing ease that can be modified when blended with similar fluoroelastomers. Eliflon C40-M00 is especially suited to curing with bisphenol-phosphonium salt systems.
Provides
- improved injection rate
- fast curing rates
- low mould fouling
- easy mould release
- good mould flow
- improved extrusion
- good compression set resistance
Application
- Injection Moulded goods
- O rings
- Gaskets, seals and profiles
- Extruded cords
Safety and Handling
Despite the chemical inertness at ambient temperature, Eliflon C types fluoroelastomers should be handled in such a way to avoid contact with skin and eyes. In case of contact, wash thoroughly with soap and water. Store in a well ventilated place away from any source of heat. Smoking is strictly forbidden in working and storage areas. In the event of fire, toxic gases are produced. Refer to MSDS for additional information. For the safe handling of other compound ingredients normally used in fluoroelastomers compounding, please refer to the respective manufacturers.
Description
Product Description
Copolymer of hexafluoropropene and vinylidene fluoride
Slabs
Off white
Odorless
1,81 ± 0,02 g/cm3
66 %
- 18 ± 1°C
Low molecular weight esters and ketones
Excellent
40 MU